Home     |     About Us     |     Services     |     News     |     Contact Us
   Building Energy Performance Limited
building energy performance, airtightness testing, building air test, building pressure testing, fan pressurisation, building regs airtightness testing, part l2 air testing, attma, cibse tm23, bsen 13829, portable fan testing, building air leakage, air infiltration testing, thermographic surveys, air leakage index, air permeability index
building energy performance, airtightness testing, building air test, building pressure testing, fan pressurisation, building regs airtightness testing, part l2 air testing, attma, cibse tm23, bsen 13829, portable fan testing, building air leakage, air infiltration testing, thermographic surveys, air leakage index, air permeability index
Whole Building Testing (New Buildings)

Did you know that since April 2002 it has been a legal requirement under part L2 of the Building Regulations to demonstrate the satisfactory construction of all non-dwelling buildings with a gross floor area of over 1,000m² by carrying out a building air tightness test? Did you also know that from April 2006 this requirement is likely to apply to all non-dwelling buildings with a gross floor area of more than 500m², and that even buildings smaller than 500m² should be tested to avoid enhancements in other areas to satisfy the Building Regulations? If you require assistance in meeting this requirement in either a pre-construction, testing or post-testing capacity, contacting Building Energy Performance should be your next step.

Trouble Shooting in Existing Buildings

Are you responsible for an existing building which suffers from excessive heat loss in winter causing discomfort to the occupants? You may be a local authority or a large private or public sector organisation who has a significant building stock. Building Energy Performance can provide an assessment of your existing building's condition using non-destructive building airtightness testing and thermographic survey techniques to expose areas of weakness in the building's construction. A remedial works plan can be developed to improve your building's thermal performance whilst simultaneously reducing its running costs and environmental impact.
 
Building Energy Performance - Building airtightness testing, site inspections & pre-test visits
Integrity Testing of Enclosures

Do you have an enclosure within a building that has specific airtightness requirements? This could be a space such as a cold room, clean room, archive store, standards room or a comms room that must maintain specific environmental conditions or which has a gaseous fire suppression system which requires high levels of air tightness to be effective. Building Energy Performance can offer advice and enclosure integrity testing to demonstrate compliance with the specified standards.
Building Energy Performance - Building airtightness testing, site inspections & pre-test visits
  © 2005 Building Energy Performance Limited | All Rights Reserved Home | About Us | Services | News | Contact Us